Published 12/2025
Created by DR AI
MP4 | Video: h264, 1920×1080 | Audio: AAC, 44.1 KHz, 2 Ch
Level: Beginner | Genre: eLearning | Language: English | Duration: 8 Lectures ( 2h 26m ) | Size: 2.1 GB
Learn CFD Analysis with SolidWorks via Hands-On Projects: External Aerodynamics, Internal Pipe Flows, and Fan Systems.
What you’ll learn
Set up, mesh, solve, and analyze a complete external aerodynamic simulation by modeling and testing a sphere in a virtual wind tunnel.
Complete the simulation setup, apply initial meshing, run the analysis, and access the core results for an external flow wind tunnel study.
Fine-tune the computational mesh to improve the accuracy and reliability of your Flow Simulation results.
Apply the complete simulation workflow to both an internal flow in a pipe junction and a system containing a fan.
Requirements
A working installation of SolidWorks (2018 or newer recommended). The Flow Simulation add-in is required. A trial or student license is sufficient.
Basic familiarity with the SolidWorks interface. You should know how to create sketches, extrusions, and simple parts/assemblies.
A computer that meets SolidWorks’ system requirements, with sufficient RAM (8GB minimum, 16GB recommended) for running simulations.
No prior simulation or CFD experience is required! All concepts will be taught from the ground up through the projects.
Description
This course teaches you how to use SolidWorks Flow Simulation through practical examples. You will learn by doing three case-studies.First, you will analyze a sphere in a wind tunnel. You will create the 3D model, set up the simulation, run the calculation, and view the results. You will also learn how to improve the accuracy of your simulation by adjusting the mesh.Next, you will simulate the flow and pressure inside a pipe junction. This shows you how to set up and solve an internal flow problem.Finally, you will model a system with a rotating fan. This project teaches you how to use engineering databases and model moving parts in a flow.The course show each step clearly. You will learn the complete process from start to finish: creating geometry, setting up the study, meshing, solving, and understanding the results.Who should take this course:Mechanical engineers and studentsProduct designers who use SolidWorksAnyone who needs to simulate fluid flow, pressure drop, or fan performance in their workUsers with basic SolidWorks modeling skillsRequirements:A computer with SolidWorks installed (2018 or newer is best)Basic knowledge of how to make parts and assemblies in SolidWorksNo previous simulation experience is requiredStart learning how to apply Flow Simulation to your own design projects today.
Password/解压密码www.tbtos.com
转载请注明：0daytown » SolidWorks Flow Simulation Mastery: Hands-On Project Course