Published 6/2025
Created by Edouard Renard
MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz, 2 Ch
Level: Intermediate | Genre: eLearning | Language: English | Duration: 46 Lectures ( 7h 10m ) | Size: 3.65 GB
ros2_control made easy – Adapt your own ROS 2 robot to ros2_control – Controller, driver, hardware interface, and so on.
What you’ll learn
Understand how ros2_control works and why to use it
Set up a complete ros2_control pipeline for your robot
Create a custom hardware interface
Write a clean C++ hardware driver
Find and configure existing ros2 controllers
Create a custom controller
Load controllers and hardware interfaces with the controller manager
Use ros2_control for a mobile base and a robotic arm
Use ros2_control with Gazebo
Practice with an additional project
Learn best practices right from the start
Requirements
This is not a course for complete ROS 2 beginners. You need to know about C++, nodes, communications, parameters, launch files, URDF, RViz, etc.
If you are just starting with ROS 2, don’t take this course first, you probably won’t understand anything. Better to start with the ROS2 for beginners series!
For this course you will need to have Ubuntu/ROS installed.
Description
You have learned ROS 2 and you’re now wondering: how can you make your ROS 2 application talk to your hardware? For this, you will need ros2_control.And maybe you’ve already started to learn ros2_control but you feel lost?Don’t worry, this is completely normal, and you found the right course for you. At the end of the course you will be able to adapt your own robot and hardware to ros2_control.– Why this course?I remember when I first started to learn ros2_control. It was a real nightmare. Almost no online resources, bloated demo codes, and the documentation makes you feel that you can only understand ros2_control if you were the one writing the source code.Thus, it takes a lot of trial and error to just be able to understand the basics. And this is if you’re already a good ROS developer.I’ve been through that and after years of experience, I have created this course. The goal? To save you countless hours and make you learn ros2_control in the easiest way possible.Instead of dropping you in a sea of documentation, I will guide you through all the steps, starting from scratch, and with hands-on lessons and projects. Also, since ros2_control means hardware, we will use real hardware for all the projects we do.Warning: this course is not for ROS 2 beginners, you need to have good ROS 2 and C++ basics to get started.– How do I teach?If you’ve taken other ROS 2 courses from me you know that I’m not here to waste your time.My teaching method is simple:Step by stepGoing to the pointLearn while doingAlso I strongly focus on the “why” behind what you learn. The goal is not just to make you blindly repeat some steps, but to understand why those steps matter.And don’t take my word for it – here are some reviews from fellow students/researchers/engineers/teachers who took my ROS 2 courses on Udemy:“Best course on ROS2 I’ve taken! Other courses (different sites/platforms) made it confusing but this course makes it so clear and easy to understand while letting you try on your own. I am definitely learning a lot in a painless and simple way. I should have gotten this course from the beginning.” – Miguel Martinez G.“Overall very satisfied. I’ve a strong background in programming, but at a higher level (web mostly) and the elegant, fluent and clean approach of this course has leveraged my introduction to the ROS environment in a short amount of time, without the struggle of going through a lot of documentation” – Devis D.“This is the best course in ROS2 I’ve ever seen” – Aleksandar K.“Great course content, straight to the point and very easy to follow” – Kevin M.– What will you do and learn in the course?You will follow a progression line that allows you to learn one thing at a time, and to uncover all the components inside ros2_control in a way that doesn’t make you feel overwhelmed.We will start from an existing URDF (which I will provide) and:Set up a ros2_control pipeline using a mock component and existing controllers. You will adapt the URDF to ros2_control, provide controller parameters in a YAML file, and write a launch file to start everything.Get best practices to write a clean C++ driver for any hardware, and learn how to integrate this driver inside a ROS 2 node.Write a hardware interface for ros2_control.Practice more with an additional project, in which you will combine a mobile base and a robotic arm.Write a custom controller.Each lesson is built on the previous ones to make learning easier.I will focus on writing clean and minimal code all along the course, so you can download the code for each part and use it as a template for your own projects.So, to learn ros2_control and save countless hours, wait no more and enroll in the course today!You don’t take any risk as you get a 30-day money back guarantee if you’re not fully satisfied – no questions asked.See you in the course!Note – this course is not for you if:You have never worked with ROS 2 before. There is no shortcut here, you first need to learn ROS 2.
Password/解压密码www.tbtos.com
转载请注明：0daytown » ROS 2 – Hardware and ros2_control, Step by Step